Home >> Products >> Umem NVRAM >> MM-5428CN

MM-5428CN

1GB, 64-bit/66MHz Low Profile, Long Option, Battery-Backed NVRAM PCI Memory Card

  • Capacity: 256MB, 512MB, 1GB
  • Battery backup: Redundant Rechargeable On-board Batteries
  • Burst Mode Transfer Rate: 533 MB/s peak
  • DMA Initiator: for Bus Mastering for maximizing read and write transfers
  • Error Detection and Correction
  • Supports Interrupts

** Tier I/II OEM Product **
An OEM product, the MM-5428CN is unavailable through distribution channels.

The MM-5428CN can be integrated into controllers, storage filers, and servers that have an available PCI slot. Mapping its non-volatile memory to PCI memory space, the MM-5428CN capably creates a dedicated, distinct memory partition to handle tasks such as caching and journaling.

The MM-5428CN significantly improves the operation of I/O bound applications. Applications that particularly benefit from the card’s solid state NVRAM on the PCI bus include those that involve file journaling, sequential logging, or frequent disk I/O's, such as data warehousing, file serving and transaction processing.

A half size PCI card, the MM-5428CN features 256MB to 1GB of NVRAM and a 64-bit/66MHz PCI interface. To protect data in a power loss, the card is backed by on-board, redundant, rechargeable lithium ion batteries. Over 25 years of development, the card’s battery circuitry and failover have been refined to ensure first-class data retention and availability. The card’s LED status lights are software programmable, and the battery status registers in the CSR can be set to monitor battery voltage.

Residing on the PCI bus, the MM-5428CN facilitates I/O transfers to memory by way of available bus speeds as opposed to the usual latency of a cable interlink. The card's non-volatility characteristics enable users to save data that might otherwise be lost in a power failure or system reset. Equipped with solid state memory, the card eliminates head seek time that typically slows down rotating storage media. These assets, in addition to its data retention capabilities, set up the MM-5425CN as the preferred answer to journaling and caching needs.

 

Capacity  

256MB, 512MB, 1GB

Interface 

64-bit and 32-bit @ 66MHz 

Burst Mode Transfer Rate

533 MB/s Peak

Bus Mastering 

DMA Initiator and Target Capabilities

On-Board Batteries 

Redundant, Rechargeable Batteries 

Compatibility

PCI Local Bus Specification Rev. 2.2

Interrupts 

Supports Interrupts 

Data Integrity 

Error detection and correction for all single-bit errors and detection for double-bit errors. 

Operating Temperature 

0° to +55° C 

Storage Temperature 

-40° to +85° C 

Relative Humidity 

Up to 95% without condensation 

Power Requirements 

Standby: 700ma, Operate: 1.68A (max) not including battery charge